SB ACOUSTICS 12
SB ACOUSTICS 12
SB ACOUSTICS 12
SB ACOUSTICS 12
SB ACOUSTICS 12
SB ACOUSTICS 12

SB ACOUSTICS 12" WOOFER NRXL

    $469.00

- +
BUY NOW
  • Order Code: SB34NRXL75-8
  • Availability: In Stock

    • LONG STROKE - HIGH FLUX - DOUBLE MAGNET 3.6KG

  • Hard paper cone for improved piston operation (made in-house) with large motor system with under-cut pole piece and dual shorting rings. Vented pole piece and vented cast aluminium chassis for optimum strength and low compression. 3″ copper voice coil for improved power handling with long life silver lead wires. Low damping rubber surround for improved dynamic linearity. Non-conducting fibre glass voice coil former for minimum damping. Optimized driver for vented enclosures.

    • Hard paper cone for improved piston operation (made in-house)
    • Large motor system with under-cut pole piece and dual shorting rings
    • Vented pole piece for minimum compression
    • Vented cast aluminium chassis for optimum strength and low compression
    • 3″ copper...

    • The goal of SB Acoustics with their NRX series of performance drivers has been to design a simple, yet optimised speaker driver at a competitive price to achieve a high performance to cost ratio for their customers who appreciate premium quality audio. To this end, SBA are proud to present their NRX series: Close attention to design engineering with manufacturing materials and processes to optimize performance. The coil former material is fibre glass. It is fundamental to use a non-conducting former material to ensure a low mechanical loss and high Qms. We prefer the damping to be electrical rather than mechanical, as this puts the amplifier in control. This is important if you want the driver to accurately reproduce the electrical signal. The woofers feature large diameter copper wire voice coils for improved power handling and allows for efficient ventilation through the centre pole. The basket is also vented under the spider to reduce compression to an absolute minimum, which is necessary to ensure good dynamics. The motor structure is simple, but all dimension have been optimizes to ensure BL symmetry and good saturation of the iron in the coil region. The surrounds are low damping SBR with a low shore hardness, which ensures good linearity. Stability is obtained by making the rolls just thick enough to withstand the high pressure in smaller cabinets without “collapsing”. The geometry of the surround and spider start limiting at the same time with a linear region slightly exceeding that of the coil overhang. This all ensures good linearity without hard clipping or mechanical damage to the cone at high levels. The cone material is made in-house using a proprietary blended hard stiff natural materials we call NOREX®. Cone stiffness is important to a woofer, as it should behave like a piston that moves air without flexing. This clearly improves bass reproduction. The baskets are cast aluminium to insure a rigid open structure. This makes the optimum foundation for the moving parts and has been designed not only to look good but also to offer some unique mounting options. They even come with gaskets pre-mounted. The copper cap also reduces the inductance. This results is increased bandwidth and improved transient response. Read / Show More
    Related Products for SB ACOUSTICS 12

    Related Products : View Product Group Page

    SB ACOUSTICS 12

    Found in Category : DELETE

    Product Specs for SB ACOUSTICS 12" WOOFER NRXL

    Type Woofer
    Size 12"
    Price Type each
    Power 200Wrms
    Coil 75.6mmØ
    Width 346mmØ
    QTY 1
    Impedance 8Ω (Re 6.2Ω)
    Depth 159mm
    Mag. 3.6kg
    Sens. 91dB
    Re 6.2Ω
    Qms 5.5
    Qes 0.29
    Qts 0.28
    Vas 205L
    Sd 508cm²
    Cms 0.56mm/N
    Fs 22Hz
    Mms 93g
    Zn 8Ω
    Le 1.2mH
    Rms 2.35kg/s
    Diam. 305mmØ
    Series Norex Cones
    Manufacturer SB Acoustics
    Materials Norex
    Impedance (Ohm) 8 ohm
    Power (RMS) 151-200 Watt
    Inch 12
    Bl 16.6Tm
    Xmax 20mm
    Flux (lm) 1.1T
    eBook

    Link to eBook
    Wagner eBook 03-180
    Prms 200W
    Page 35
    DescriptionFileSize
    Datasheet SB34NRXL75-8.pdf 784 KB
    SB Acoustics Catalogue SB-Acoustics-Catalogue.pdf 26130 KB

    Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

    Enter Full Name
    Enter Email Address Enter Valid Email
    Enter Phone Number
    Download Required / Comments.

    Enter Full Name SB34NRXL75-8
    Enter Email Address Enter Valid Email
    Enter Phone Number
    Enter The Question

    Contact us for Bulk Buy and Project Based Pricing for SB ACOUSTICS 12" WOOFER NRXL

    Enter Full Name
    Enter QTY
    Enter Email Address Enter Valid Email
    Enter Delivery Time
    Enter Phone Number

    Enter The Notes / Addtional Info.

    $9.90 Australia Wide Flat Rate Shipping*

    No matter where you are located in Australia we offer flat rate shipping. Some conditions apply,
    please see our Terms and Conditions page.

    Store Pick Up from Sydney Showroom

    Goods can be picked from our premises from 8.30AM to 5.00PM Monday to Friday and from 9AM till 4PM on Saturday.
    In order to avoid delays it is recommended that you place your order 2 hours prior to pick up. please see our
    Terms and Conditions page for more details.

    International Order Shipping Available

    We ship internationally. Once your order is received we will advise shipping cost to you by email.
    Your order will be updated with the freight cost.

    © 2015 Wagner Online Store. All Rights Reserved