8" CARBON FIBER CONE NEODYMIUM - DAYTON AUDIO

$742.50

- +

BUY NOW

Order Code: E220CF-8

Availability: Please Call

Ships out within 1 - 14 Days

Dayton Audio raised the bar with the Epique E220CF-8 8" woofer. Constructed of high-end materials like a damped carbon fiber cone, titanium former, and huge neodymium magnet this driver produces natural sound with remarkably low distortion. In addition, the low moving mass, underhung voice coil and powerful motor allows the E220CF-8 to deliver incredible dynamics and transient response. - FEA optimized underhung neodymium motor minimizes distortion, increases efficiency, and improves electrical damping Titanium former provides virtually no eddy currents improving efficiency and transient response Damped carbon fiber cone lowers moving mass and minimizes unwanted resonances Large shorting sleeve lowers inductance and extends frequency response EVS™ (Extensive Venting System) allows generous airflow around the voice coil reducing power compression - The Epique E220CF-8 8" woofer from Dayton Audio combines high-end materials with advanced engineering to create a truly world class, no-compromise driver. Dayton Audio has scrutinized and optimized every aspect of this driver to keep distortion as low as possible while still producing impressive efficiency and a frequency response that is easy to work with. You can expect excellent off-axis and transient response from the E220CF-8 for a great sound stage and realistic sound reproduction. With top-notch components and quality construction, these drivers exemplify the axiom, “The whole is far greater than the sum of its parts.” The Epique E220CF-8 design is all about low distortion and high dynamics. The impressive FEA optimized motor assembly uses a large neodymium magnet with top and bottom plates thick enough to provide an impressive amount of force across the magnetic gap. The pole piece includes a thick aluminum shorting sleeve that minimizes inductance and provides virtually linear impedance up to 20,000 Hz (under 12 ohms at 20,000 Hz). Driving the cone is a 2.125" (55 mm) underhung dual layer voice coil wrapped around a titanium former that generates minimal eddy currents improving efficiency and transient response. The focal point of the E220CF-8 is the one-piece epoxy coated carbon fiber cone. Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound. A rubber surround and large flat spider suspends the cone and keeps it linear through the limits of excursion with minimal restriction, further improving dynamics and transients. Holding everything together is the open cast aluminum frame, which is rigid but minimalistic enough to allow plenty of "breathing room” for the back side of the cone to keep reflections under control. One other aspect of this driver that deserves attention is the EVS™ (Extensive Venting System) voice coil and motor venting. To keep the voice coil and magnet cool while minimizing compression and extraneous noise the E220CF-8 has 8 vents in the voice coil former, 16 large openings under the spider, 7 peripheral vents in the voice coil gap, and a large aerodynamic flared vent through the pole piece.

The Epique E220CF-8 8" woofer from Dayton Audio combines high-end materials with advanced engineering to create a truly world class, no-compromise driver. Dayton Audio has scrutinized and optimized every aspect of this driver to keep distortion as low as possible while still producing impressive efficiency and a frequency response that is easy to work with. You can expect excellent off-axis and transient response from the E220CF-8 for a great sound stage and realistic sound reproduction. With top-notch components and quality construction, these drivers exemplify the axiom, “The whole is far greater than the sum of its parts.” The Epique E220CF-8 design is all about low distortion and high dynamics. The impressive FEA optimized motor assembly uses a large neodymium magnet with top and bottom plates thick enough to provide an impressive amount of force across the magnetic gap. The pole piece includes a thick aluminum shorting sleeve that minimizes inductance and provides virtually linear impedance up to 20,000 Hz (under 12 ohms at 20,000 Hz). Driving the cone is a 2.125" (55 mm) underhung dual layer voice coil wrapped around a titanium former that generates minimal eddy currents improving efficiency and transient response. The focal point of the E220CF-8 is the one-piece epoxy coated carbon fiber cone. Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound. A rubber surround and large flat spider suspends the cone and keeps it linear through the limits of excursion with minimal restriction, further improving dynamics and transients. Holding everything together is the open cast aluminum frame, which is rigid but minimalistic enough to allow plenty of "breathing room” for the back side of the cone to keep reflections under control. One other aspect of this driver that deserves attention is the EVS™ (Extensive Venting System) voice coil and motor venting. To keep the voice coil and magnet cool while minimizing compression and extraneous noise the E220CF-8 has 8 vents in the voice coil former, 16 large openings under the spider, 7 peripheral vents in the voice coil gap, and a large aerodynamic flared vent through the pole piece.

FEA optimized underhung neodymium motor minimizes distortion, increases efficiency, and improves electrical damping
Titanium former provides virtually no eddy currents improving efficiency and transient response
Damped carbon fiber cone lowers moving mass and minimizes unwanted resonances
Large shorting sleeve lowers inductance and extends frequency responseEVS™ (Extensive Venting System) allows generous airflow around the voice coil reducing power compression

Read / Show More

Related Products : View Product Group Page

Found in Category : Speaker Drivers

Product Specs for 8" CARBON FIBER CONE NEODYMIUM - DAYTON AUDIO

Description	E220CF-8 8" Carbon Fiber Cone Neodymium Driver 8 Ohm
Manufacturer	Dayton Audio
Type	Midbass
Colour	Black
Coil	2.125"
Hole	191mmØ
QTY	1
Impedance	8Ω
Depth	115mm
Voice	Titanium
Sens.	91.5 dB
Re	6.1Ω
Qms	7.14
Qes	0.26
Qts	0.25
Vas	91.4L
Sd	216.4 cm²
Cms	1.39 mm/N
Bl	10.00 Tm
Pmax	300 watts
Fs	26.9 Hz
Mms	25.2 g
Le	0.70 mH
Xmax	5.0 mm
Diam.	220mmØ
Wire	Copper
Prms	150W
Material	Cast Aluminium
Magnetic	Neodymium
Vd	108.2 cm³
Surround Material	Rubber
Series	Epique
Power (RMS)	101-150 Watt
eBook	View Dayton Audio USA Brochure
Power	150W
Inch	8
Impedance (Ohm)	8 ohm
UPC	848864050133
Zn	8Ω
Brand.	Dayton Audio
Price Type	each

Description	File	Size
Datasheet	E220CF-S-specs.pdf	1720 KB
	E220CF-S-specs.pdf	1720 KB
Dayton Audio USA Catalogue	DaytonAudio.pdf	44432 KB

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

Full Name* Enter Full Name

Email* Enter Email Address Enter Valid Email

Phone* Enter Phone Number

Code*

Download Required / Comments** Download Required / Comments.

Chars Remaining

Product Code*

Full Name* Enter Full Name

QTY Required* Enter QTY

Email* Enter Email Address Enter Valid Email

Delivery Time* Enter Delivery Time

Phone* Enter Phone Number

Target Price

Code*

Notes / Addtional Info.* Enter The Notes / Addtional Info.

Chars Remaining

$9.90 Australia Wide Flat Rate Shipping*

No matter where you are located in Australia we offer flat rate shipping. Some conditions apply,
please see our Terms and Conditions page.

Store Pick Up from Sydney Showroom

Goods can be picked from our premises from 8.30AM to 5.00PM Monday to Friday and from 9AM till 4PM on Saturday.
In order to avoid delays it is recommended that you place your order 2 hours prior to pick up. please see our
Terms and Conditions page for more details.