CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA

CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA

$2009.70

Order Code: RPR-CF-00538

Availability: DISCONTINUED NO LONGER AVAILABLE PLEASE CONTACT US

ETA : PLEASE CALL

TELSTRA GO 3G (850) OR 4G (700/1800) – SINGLE BAND

Introducing the Cel-Fi Cellmate, a portable mobile repeater in an industrial case that can be transported and used where mobile signal is needed.

The Cel-Fi Cellmate for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your car, 4WD, or truck and for emergency services, being transported between fleet vehicles, construction or mining sites. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past. Cellmate features a Cel-Fi GO, power supply and battery backup in a Pelican Case 1400 which is IP67 Watertight, crushproof and dustproof. Coupled with antennas (sold separately) and the Cel-Fi WAVE smartphone app, Cellmate is the ideal solution to resolve coverage challenges, in the harshest environments

Ideal for emergency services, being transported between fleet vehicles, construction or mining sites. The Cellmate in...

Cel-Fi Cellmate for repeating Telstra GO 3G (850) or 4G (700/1800)
Select manual or auto, to boost 3G or 4G (only one band at a time)
Pelican Case 1400 - IP67 Watertight, crushproof, and dustproof – 340x295x152mm
240 Mains Power Supply & 12V Vehicle accessory Lighter power supply inbuilt charger
Truly portable solution with inbuilt battery – supplies power for up to 10 hours
Bluetooth Cel-Fi WAVE App control. Reception level, boost level, 3G or 4G mode.
Internal transmit antenna in the base of the case 5dBi thin panel type antenna
External SMA/F Antenna port for connection to a high gain reception antenna
External antenna, mount and cabling are sold separately

Powering Cellmate

The system can be powered from:
• Mains Power - using the included 240v Battery LED’s adaptor
• DC Power - using the included 12v cigarette plug adaptor
• Internal Battery - providing power for 6 to 10 hours

Charging the Internal Battery

• Connect a 12V cigarette adaptor or 240V mains power supply to the ‘power port’ on the Cellmate, charging will start.
Connect External Antenna
• To received a mobile signal an external antenna that supports your carriers specific cellular bands must be connected to the antenna port.
• The external antenna, mount and cable is not included with the Cellmate.
• We offer a range of Blackhawk antennas that have been tested with Cellmate.

Optimising the Antennas

Cellmate includes an embedded ‘service antenna’ built into the base of the case.
The lid of the case features an RF shield to assist with isolation.
Antenna Isolation is Important: For Cellmate to work at optimal boost you need to separate/isolate the inbuilt ‘service antenna’ from the external antenna as much as possible. If the external antenna picks the signal that is disbursed from the inbuilt coverage antenna, then the boost and signal coverage area will be reduced.

Download Cel-Fi WAVE App

Cel-Fi WAVE is an App on your smart phone that enables you optimise the antenna setup:
• Check the input signal level from the network
• Check the ‘Boost’ figure (6-9 is ideal)
• Change mode or use the Mode Switch on the Cel-Fi GO
• 3G -will boost a 3G signal, • 4G/4GX -will boost a 4G signal
•Auto -will boost the strongest 3G or 4G signal

Note: Telstra/Optus units will only boost one band at a time

Note: Vodaphone unit will not boost regional (Vodaphone shares carriers)

Note: An external high-gain reception antenna, mount and cable is required to be added to this pack. Read / Show More

Related Products for CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA

Related Products : View Product Group Page

Found in Category : DISCONTINUED

Product Specs for CEL-FI GO CELLMATE V2 – PORTABLE MOBILE REPEATER - TELSTRA

Description	Cel-Fi GO Cellmate V2 - Portable Mobile Repeater IP67 Telstra Cel-Fi GO Cellmate V2 - Portable Mobile Repeater IP67 Telstra
Network	Telstra
Type	Portable Kit
Description Extended	The Cellmate for Telstra features a Cel-Fi GO, power supply and battery backup in a IP67 rugged pelican case. Suitable for boosting and distributing a 3G/4G mobile signal within your car or transport to a remote work site. Ideal for emergency services, being transported between fleet vehicles, construction or mining sites.
Feature	100dB of system gain (latest software update required using WAVE App) Includes external and internal antennas Up to 900m2 of coverage Band Selection Button Bluetooth WAVE App for iPhone, Android & Computers Designed for caravan applications 100dB of system gain (latest software update required using WAVE App) Includes external and internal antennas Locked to Telstra’s Mobile Network Carrier approved
Certification	Cel-Fi Go Cellmate V2 has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network
Band	3G/4G
Frequency	850MHz or 700/1800MHz
In	Required*
Lead	Required
Out	Built-In to case
Power	240Vac / 12Vdc
Wagner eBook	06-4
Manufacturer	Cel-Fi
Device Type	Portable Kit

Description	File	Size
Cel-Fi Go Cellmate V2 Datasheet	Cellmate-Datsheet.pdf	669 KB
Cel-Fi Go Cellmate V2 Quick-Start	Cellmate-Quick-Start-Guide.pdf	774 KB

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

Full Name* Enter Full Name

Email* Enter Email Address Enter Valid Email

Phone* Enter Phone Number

Code*

Download Required / Comments** Download Required / Comments.

Chars Remaining

Product Code*

Full Name* Enter Full Name

QTY Required* Enter QTY

Email* Enter Email Address Enter Valid Email

Delivery Time* Enter Delivery Time

Phone* Enter Phone Number

Target Price

Code*

Notes / Addtional Info.* Enter The Notes / Addtional Info.

Chars Remaining

$9.90 Australia Wide Flat Rate Shipping*

No matter where you are located in Australia we offer flat rate shipping. Some conditions apply,
please see our Terms and Conditions page.

Store Pick Up from Sydney Showroom

Goods can be picked from our premises from 8.30AM to 5.00PM Monday to Friday and from 9AM till 4PM on Saturday.
In order to avoid delays it is recommended that you place your order 2 hours prior to pick up. please see our
Terms and Conditions page for more details.