12.8V 200Ah LiFePO4 PRISMATIC CELLS

$1505.75

- +

BUY NOW

Order Code: 12LFP200P

Availability: Please Call

Ships out within 1 - 2 Days

RECHARGEABLE LITHIUM IRON PHOSPHATE BATTERY

Drypower 12LFP200P is a 12.8V 200Ah Lithium Iron Phosphate (LiFePO4) rechargeable battery with M8 bolts terminals. Compact and light weight compares to SLA batteries with the same capacity. Fast charging. The battery has a 4S4P configuration. This battery is made with prismatic LiFePO4 cells inside and should only be used and mounted in an upright position for the best service life.

Rechargeable Lithium LiFePO4 high power modules to handle anything SLA can. Get 100% capacity utilisation at less than half the weight. Advanced battery technology for cyclic and motive power applications such as mobility, recreational caravan & RV, marine, medical equipment, solar applications and more.
Deep cycle power rechargeable lithium batteries with over 2000 cycles to 100% DoD in industrial or high drain applications.
All the power without the bulky weight of Lead Acid battery equivalents.
High rate discharge capable and superior total capacity utilisation (up to 100% DoD) with a flat discharge curve for strong, consistent power delivery.
Low self discharge and long storage life with no risk of sulphation.
Integrated layers of safety to IEC62133-2:2017 and UN38.3 standards at the cell level as well as BMS level protection against over charge, over voltage, under voltage and over temperature. Enclosed in IP5x/IP6x rated protective case for better durability in harsh environments.

What is Total Cost of Ownership?
Total Cost of Ownership (TCO) refers to the cost of owning and running an asset. It is a useful way of assessing the value of a product over its service life, as opposed to simply looking at its upfront pricing. In a typical TCO scenario, the cost of running a Drypower Rechargeable Lithium battery can be as low as 1/3* the cost of an AGM lead acid battery.
*This is an approximate figure and provided as a guide only. This figure may vary by region, provider/s, battery brand/models, device and/or application, and user’s individual usage pattern.

Long Service Life, >2000 cycles @100% DoD (25°C) to 80% of original capacity - longer service life than SLA to reduce maintenance costs.
Higher total system capacity and superior utilisation (full 100% DoD) to reduce overall system size and footprint. More Power p/kg.
Enclosed in IP64 ingress rated case with closed loop terminals - suitable for harsh environments
Stable Chemistry & Built-in Circuit Protection
Lightweight, Approx. 1/2 the weight (or less) of equivalent in SLA means lower logistics costs and minimal OH&S concerns.
Faster charge/discharge rates (C/2 LiFePO4 vs C/20 SLA) for higher power usage and less downtime when charging.
Wide Operating Temperature Tolerance from -20°C up to +60°C.
Fully Recyclable Battery, with no lead or calcium that can leak into the environment.

Do NOT short circuit, crush or disassemble.
Do NOT heat or incinerate.
Do NOT immerse in any liquid.
Do NOT allow the battery to become overdischarged.
If possible, isolate the battery when not in use.
Do NOT leave the battery in a discharged state.
Always recharge after use with a Drypower approved LiFePO4 charger.
Store at 50% capacity. Recharge every 3 months.
The storage area should be clean, cool, dry and ventilated.
Maximum 4 units in series. No parallel connection allowed.

BUILT-IN PROTECTION
All Drypower Rechargeable Lithium batteries adhere to strict safety guidelines by incorporating Battery Management Systems (BMS) that include protection components such as: Integrated Circuit MOSFET, FuseThermistor, Protection Circuit Module (PCM).
The BMS in each Drypower battery helps to: Maintain safety for users. Prevent damage to equipment and property. Eliminate concerns about use of the wrong type of charger. Minimise the risk of over discharge causing damage. Provide short circuit and overcharge protection.

NOTE: Do not use standard SLA chargers for LiFePO4 batteries. You must only charge with LiFePO4 battery chargers. NOTE: Prismatic LiFePO4 cells design, this battery should only be used and mounted in an upright position for the best service life. Read / Show More

Related Products for 12.8V 200Ah LiFePO4 PRISMATIC CELLS

Related Products : View Product Group Page

Found in Category : Batteries Rechargeable

Product Specs for 12.8V 200Ah LiFePO4 PRISMATIC CELLS

Description	Drypower 12.8V 200h Lithium Iron Phosphate (LiFePO4) Rechargeable Lithium Battery - Up to 4 in Series Capable
Voltage	12.8V
Assembly	4S4P
Capacity	200Ah
Cell Type	Prismatic
Cells	IFP23140160
Charge Current Max.	150A
Charge Voltage Max.	14.6V
Discharge Current Max	150A
Discharge Cut-off Voltage	10V
Height	240mm
Height (Inc Terminal)	240mm
IP	IP64
Length	490mm
Manufacturer	Drypower
Orientation	Upright only
Parallel	No
Series	Up to 4S
Size	490x170x240mm
Term.	F18 (M8 Bolt)
Terminal Type	F18 (M8 Bolt)
Volts	12.8V
Watt	2560Wh
Weight	21.5kg
Width	170mm
Dimensions	490x170x240mm
Wagner eBook	08-35
Chemistry	LiFePO4
Temp.	Maximum ambient temperature 65ºC
Note.	NOTE: Do not use standard SLA Chargers with LiFePO batteries. You must only charge with LifePO4 battery chargers.

Description	File	Size
Datasheet	12LFP200P.pdf	837 KB
Drypower Battery Brochure	drypower_lithium_range_2021.pdf	9551 KB

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

Full Name* Enter Full Name

Email* Enter Email Address Enter Valid Email

Phone* Enter Phone Number

Code*

Download Required / Comments** Download Required / Comments.

Chars Remaining

Product Code*

Full Name* Enter Full Name

QTY Required* Enter QTY

Email* Enter Email Address Enter Valid Email

Delivery Time* Enter Delivery Time

Phone* Enter Phone Number

Target Price

Code*

Notes / Addtional Info.* Enter The Notes / Addtional Info.

Chars Remaining

$9.90 Australia Wide Flat Rate Shipping*

No matter where you are located in Australia we offer flat rate shipping. Some conditions apply,
please see our Terms and Conditions page.

Store Pick Up from Sydney Showroom

Goods can be picked from our premises from 8.30AM to 5.00PM Monday to Friday and from 9AM till 4PM on Saturday.
In order to avoid delays it is recommended that you place your order 2 hours prior to pick up. please see our
Terms and Conditions page for more details.