Phone: 02-9798-9233 Fax: 02-9798-0017 Power & Lighting 08-138 Digital Addressable LED is a new and easy way to add complex lighting effects to any project. The difference between "analogue" and "digital" is the analogue-type strips have all the LEDs connected in parallel and it acts like one huge tri-colour LED and you can set the entire strip to any colour you want, but you can't control the individual LED's colours. For the "Digital" type, there are control chips (WS2811) embedded along the strip to interpret the digitally coded data to change the colour of individual LEDs. LED strips come in 5M reels. There are 300 individually addressable 5050 Type LEDs in total so the strips feature a lot more LEDs closer together than some of the other models on the market. There is one WS2811 IC to control every group of three LEDs. At one end of the LED strip, there is a 3 pin JST SM plug and a 2 wire cable. At the another end, there is a JST SM receptacle and a 2 wire cable. The JST connector makes it easier to wire up without soldering. The 2 wire cable is used to inject power when you are joining LED strips together, this ensures ample power so the LEDs do not appear to loose brightness over longer installations. DIGITAL ADDRESSABLE LED - FULL COLOUR RGB STRIPS - WS2811 IC BUILT-IN The LED strip is made of a flexible material and can be gently bent around curved surfaces. DIGILED-1101, 1111 has adhesive tape on the back for mounting (excludes 1121). You can cut the LED to the length needed at the cutting line where JST can be attached. Easy to customise for different types of projects. The three models of digital addressable LED strips differ by the IP ratings. The DIGLED-1101 is rated at IP20. It has no waterproof property and is designed for indoor applications. The DIGLED-1111 is rated at IP65. This LED strip is coated with a layer of resin to stop ingress from affecting the LEDs. It is suitable for applications where moisture and dust may accumulate. The DIGLED-1121 is rated at IP68 and is fully sealed inside a silicone jacket making it suitable for outdoor applications that require withstanding the elements. DIGLED strips are controlled by the SP103E with RF remote control. The simple to use remote features over 300 types of lighting effects and patterns to choose from. Requires a 12Vdc power supply (3A to 5A is recommended) for each strip, these are sold separately. WS2811 LED Chip Cutting Line WS2811 JST SM Plug & Receptacle Adhesive Tape Bendable Individually addressable LED DIGLED-1101 IP20 Open DIGLED-1111 IP65 Sealed DIGLED-1121 IP68 GEL INDOOR OUTDOOR Length Colour IP Rating Code 5 Metres Full colour RGB IP20 DIGLED-1101 5 Metres Full colour RGB IP65 DIGLED-1111 5 Metres Full colour RGB IP68 DIGLED-1121 RF CONTROLLER FOR DIGITAL ADDRESSABLE LED STRIPS This RF controller module is designed to use for digital addressable strip lights with WS2811 IC chips. It features a RF remote and a controller for controlling the LED strip. Each controller can control up to 2048 pixels (LEDs). It has 300 pre-programmed effects to choose from. And brightness is adjustable. Suitable for 12V LED strips. Code SP103E 12V POWER SUPPLY FOR DIGITAL ADDRESSABLE LED STRIPS Current Code 5000mA SMP12V5A-21P This power supply comes with a 2.1mm DC plug. It can also be used for power injection when cascading LED strips by cutting off the DC plug and terminating the wires directly onto 2x extra power injection wires on the cascading strips. Screw connector back Size Plug Code 2.1mm Pos. Tip AD-DCJ21 2.1mm DC SOCKET SCREW 2.1mm DC SOCKET PIGTAIL 30cm lead to bare end. Red & Black Cable. Size Plug Code 2.1mm Pos. Tip DCL-J21 Adhesive backed “3M” Adhesive backed “3M” Not adhesive backed
RkJQdWJsaXNoZXIy NDQ2MDk=