Phone: 02-9798-9233 Fax: 02-9798-0017 AV TV SAT Install 01-102 DS/MS FOXTEL approved satellite multistacker with built-in DVB-S/S2 tuner and decoder is a standalone device that can be installed directly after a twin or quad universal dual polarisation LNBF. It is typically installed before the first distribution point in the SMATV system. The Multistacker has 4 input ports which cater for low & high band signals. It has 2 ports on the bottom for local and remote power for the multistacker. Distribution Satellite SATELLITE MULTISTACKER - JONSA FOXTEL® FOXTEL® APPROVED F30975 Code DS/MS DC Power: 10mA Power Passing: 500mA DISEQC 2.0 SWITCH 4-WAY 950-2400MHz LNB REMOTE SWITCH 4-Way DiSEqC switch. Zinc die-cast housing, nickel-plated. DiSEqC 2.0. Supports bi-directional communications. Frequency Range: 950-2400MHz Impedance: 75 Ohm Insertion loss: 3dB Return Loss: 8dB Isolation: 20dB Voltage: 12-20Vdc Code SAT1000 DC Power: 10mA Power Passing: 500mA 22KHZ TONE SWITCH 2-WAY 950-2400MHz LNB REMOTE SWITCH Switches from LNB-A to LNB-B on the presence of a 22KHz signal. Code SAT1002 Frequency Range: 950-2400MHz Impedance: 75 Ohm Insertion loss: 3dB Return Loss: 8dB Isolation: 20dB Voltage: 12-20Vdc Code DSB38F The Kingray DSB38F is a high gain Free-to-Air & Satellite distribution amplifier for use in SMATV applications. It features a combined single input & single output connector, with adjustable gain and equalisation controls, as well as input attenuators. Foxtel® approved F30977. SAT & TERRESTRIAL AMP - KINGRAY FOXTEL® FOXTEL® APPROVED F30977 DISEQC 2.0 SWITCH 4-WAY IP66 4 WAY DISEQC SWITCH WITH WEATHERPROOF CASE 4-Way DiSEqC switch. Zinc die-cast housing, nickel-plated. All the same plug direction. Outdoor, wall or mast mount housing 45x80x100mm. DiSEqC 2.0 Code SAT1004 3 INPUT TO 4/8 OUTPUT MULTISWITCH - SATKING Connect a dual output LNB with LNB A and LNB B. This will provide horizontal and vertical signals through out the complete installation. Connect the terrestrial TV antenna to the Terrestrial port and existing TV will also merge into the system. No power injector is required for this Multiswitch as the power is provided by the satellite receiver. • 2 x Satellite inputs • 1 x Terrestrial input • Satellite TV input: 950-2150 MHz • Terrestrial TV input: 47-862 MHz • Available with 4 or 8 “F” x Outputs Input Output Code 2x Satellite, 1x Terrestrial 4x "F" SK-9164 2x Satellite, 1x Terrestrial 8x "F" SK-9166 2 IN 4 OUT "F" SATELLITE MULTISWITCH FOXTEL APPROVED F31104 The KMS24 multiswitch has a frequency range of 950-2150 MHz, with a low power consumption & is manufactured in a compact zinc die-cast housing. • Frequency Range of 950-2150 MHz • Insertion Gain 0~+2dB • 2 Inputs - Vertical & Horizontal Satellite Signals • 4 Outputs • Connectors: F-Type • Current Consumption: <50mA DC • Remotely powered by the satellite receiver Code KMS24 2 IN 8 OUT "F" SATELLITE MULTISWITCH The KMS28 is a 2 In 8 Out satellite multiswitch, which has a frequency range of 950-2150 MHz, with a low power consumption & is manufactured in a compact zinc die-cast housing. • Frequency Range of 950-2150 MHz • Insertion Gain 0~+2dB • 2 Inputs - Vertical & Horizontal Satellite Signals • 8 Outputs • Connectors: F-Type • Current Consumption: <50mA DC • Remotely powered by the satellite receiver Code KMS28
RkJQdWJsaXNoZXIy NDQ2MDk=