Phone: 02-9798-9233 Fax: 02-9798-0017 Audio Speakers & PA 03-48 ZONE AMPLIFIER WITH MIC INPUT AND WIRED REMOTE VOLUME The PRO1328K is a stereo power amplifier with 3.5mm auxiliary and dynamic microphone inputs to stereo 15W output for your speakers. The amplifier can be conveniently tucked-away with only the volume controller visible. The wired remote volume and power I/O controller is connected to the amplifier unit with common CAT5e network cable. This cable is not included so please also order your CAT5 patch cable depending on length required. [See Data & Computer Section 04] • 15 Watts RMS per channel for ample volume • Class D power amplifier for efficiency and low heat • Wired remote volume control with power off • Speaker protection circuit for long service life • Speaker screw terminals for wire sizes up to 12 gauge • Amp module: 115x95x33mm, Controller: 65x45x40mm • 12V 2A Power pack included Code PRO1328K Note: Controller can be connected to the amplifier with an optional CAT5e/6 cable (sold separately) The PRO1328 is a stereo audio power amplifier in a small metal box. Use it to power in-ceiling, in-wall or box speakers with the 15W amplifier output. Connect any 3.5mm line audio source device such as computers, media players, TVs, etc. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. All in a simple to connect, compact solution. The unit accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. ZONE AMPLIFIER WITH MICROPHONE INPUT Code PRO1328 • 15W(rms) per channel (@ RL=4 ohm) output power • Stereo Class-D type highly efficient power amplifier • 40dB microphone pre-amplifier gain. 6.35mm socket • Small size and compact: 95mm x 75 mm x 27mm • Suitable for wall-mounting • Speaker screw terminals handle wire sizes from 24 to 12 gauge • 12V 2A power-pack included STEREO 15W AMPLIFIER CLASS-D STEREO 15W AMPLIFIER IN A COMPACT BOX CAT5 CABLE REQUIRED ZONE AMPLIFIER WALL PLATE WITH MICROPHONE INPUT • 15W(rms) per channel Class-D stereo output power • Switch between 3.5mm (line) or 6.35mm microphone inputs • Discrete and compact Decora-style wall-plate design • Speaker screw terminals handle wire sizes from 24 to 12 gauge • Requires speakers and Dynamic Microphone Code PRO1328WP PRO1328WP 12VDC 2.5A Power supply (inc.) Dynamic microphone (not included) In-wall/In-ceiling speakers (not included) Radio/MP3 player (not included) STEREO 15W AMPLIFIER CLASS-D Audio Extenders - Zone Amp Wall Plate Types RECEIVER SENDER WALL PLATE SENDER The PRO1328WP is a stereo audio 15W amplifier with a microphone input all built-in to a wall plate. Use it to power in-ceiling or in-wall speakers with the audio output from a line-level source device such as computers, media players, TVs, etc. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. All in a simple to connect, compact solution. Ideal for use with Indoor/Outdoor box Speakers and In-ceiling/In-wall Speakers, etc. The wall plate amplifier accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. 12Vdc 2A power supply is included and can be front facia connected or rear soldered if required. 115x68x45mm CAT5 EXTENDER REDBACK - PA4928 RECEIVER The Redback CAT5 Extender series is desingned to send and receive audio over CAT5 cable up to a maximum distance of 300 metres. An installation requires one receiver PA4928 and your choice of sender being a PA4932 unit or wall plate style options PA4931 (Horizontal) or PA4931V (Vertical), all sold separate. The input to output is either a balanced microphone XLR, or line level stereo audio via RCA or 3.5mm. The receiver includes a mains power pack and phantom powers the senders via the CAT5 cable. These units are of premium quality and performance and made in Australia by Redback. AUSTRALIAN MADE Code PA4932 Type Code Horizontal PA4931 Vertical PA4931V Code PA4928
RkJQdWJsaXNoZXIy NDQ2MDk=