Phone: 02-9798-9233 Fax: 02-9798-0017 Audio Speakers & PA 03-128 6" PRO KEVLAR/PAPER CONE MIDRANGE Impedance 8Ω (Re 6.8Ω) Fs 91.5Hz Power 100W Sens. 91.4dB Qms 7.93 Qes 0.77 Qts 0.7 Vas 7.69L Diam. 165mmØ Hole 145mmØ Depth 75mm Code PK165-8 6½" CLASSIC PAPER CONE WOOFER • Can be used as a woofer, mid-bass, or even as a small subwoofer • Smooth frequency response up to 2 kHz and great bass response • Rubber surround, aluminium voice coil, and extended bump plate • Low 34 Hz free-air resonance Impedance 8Ω (Re 6.6Ω) Fs 35.7Hz Power 50W Sens. 86.1dB Qms 3.46 Qes 0.38 Qts 0.34 Vas 17.9L Diam. 165mmØ Hole 145mmØ Depth 77.2mm Code DC160-8 Provides high output, extended frequency response, and low distortion - perfect for use in compact full range or multi-way speaker systems. Steel frame, Kevlarimpregnated paper cone, treated cloth surround, vented pole piece, and a 1½" aluminium voice coil wound on a polyimide former. 6½" SUBWOOFER CLASSIC SERIES - DAYTON Capable of impressive low end when installed in enclosures of less than 0.5 cubic feet, the DCS165-4 6-1/2" subwoofer from Dayton Audio's Classic Series is the perfect low cost solution for compact low frequency designs. Impedance 4Ω (Re 3.4Ω) Power 100W Fs 35.7Hz Sens. 87.4dB Type Subwoofer Qms 6.62 Qes 0.36 Qts 0.34 Vas 12.1L Diam. 167mmØ Hole 143mmØ Depth 83mm Code DCS165-4 5¼" CLASSIC SHIELDED WOOFER • Treated paper cone provides smooth response & low energy storage • Rubber surround, aluminium voice coil, and extended bump plate • Large diameter flat spider and good Xmax for clean bass • Smooth frequency response up to 2 kHz and great bass response • Shielded design increases performance Impedance 4Ω (Re 3.55Ω) 8Ω (Re 5.8Ω) Fs 51.8Hz 50.5Hz Power 30W 30W Sens. 91.6dB 88.9dB Qms 1.86 1.82 Qes 0.44 0.49 Qts 0.35 0.39 Vas 13.2L 13.8L Diam. 145mmØ 145mmØ Hole 120mmØ 120mmØ Depth 77.4mm 77.4mm Code DC130BS-4 DC130BS-8 4" DESIGNER SERIES WOOFER 5" DESIGNER SERIES WOOFER • Optimised to yield high potential bass output in a reasonably sized cabinet • Coated paper cone, half roll rubber surround for accurate reproduction • Vented pole piece for minimised power compression • Smooth frequency response and linear roll-off simplify filter design Impedance 8Ω (Re 5.8Ω) Fs 55.2Hz Power 35W Sens. 85.3dB Qms 2.1 Qes 2.1 Qts 0.38 Vas 4.33L Diam. 116mmØ Hole 94mmØ Depth 52mm Code DS115-8 • Optimised to yield high potential bass output in a reasonably sized cabinet • Coated paper cone, half roll rubber surround for accurate reproduction • Vented pole piece for minimised power compression • Smooth frequency response and linear roll-off simplify filter design Impedance 8Ω (Re 5.9Ω) Fs 52.5Hz Power 50W Sens. 86.6dB Qms 2.02 Qes 0.48 Qts 0.39 Vas 7.27L Diam. 135mmØ Hole 112mmØ Depth 65mm Code DS135-8 4" REFERENCE SERIES WOOFER • Truncated cast frame, great for line arrays / MTM speaker designs • Long-excursion motor and suspension for strong bass performance • Advanced low-distortion motor design • Distortion-reducing copper ring in magnetic gap • Lightweight black anodised aluminium cone Impedance 8Ω (Re 6.5Ω) Power 30Wrms Fs 94.9Hz Sens. 87dB Qms 2.4 Qes 0.79 Qts 0.6 Vas 2.4L Diam. 98mmØ Hole 77mmØ Depth 51mm Code RS100T-8 6" REFERENCE WOOFER - DAYTON AUDIO • Dayton Reference Series premium audio drivers for optimal performance • Low-distortion high-excursion motor system with two short-circuit paths • Compliant suspension and rigid anodised aluminium cone for strong bass • 6-hole cast frame, low-loss rubber surround, and solid aluminium phase plug • Centre phase plug to extend power dissipation and precision sound radiation Impedance 4Ω (Re 3.1Ω) 8Ω (Re 6.3Ω) Fs 45.1Hz 47.8Hz Power 40W 40W Sens. 91.8dB 88.7dB Qms 1.96 1.66 Qes 0.4 0.43 Qts 0.33 0.34 Vas 16.4L 16.6L Diam. 150mmØ 152mmØ Hole 121.5mmØ 121.5mmØ Depth 70mm 70mm Code RS150-4 RS150-8 Dayton Audio - Woofers and Mid-Woofers PHASE PLUG PHASE PLUG
RkJQdWJsaXNoZXIy NDQ2MDk=