METALISED POLYPROPYLENE - MKP

Technical Data 
Tolerance: ±5 % 
Dielectric Constant: 2.1 εr, non-polar dielectric. 
Dielectric Absorption Factor: ≤ .05 % @ 20 °C. 
Equivalent Series Resistance: E

Technical Data 
Tolerance: ±5 % 
Dielectric Constant: 2.1 εr, non-polar dielectric. 
Dielectric Absorption Factor: ≤ .05 % @ 20 °C. 
Equivalent Series Resistance: Extremely low. 
Self Inductance: ≤ 12 nH with 6 mm leads. 
Dissipation Factor: Extremely low. 
Insulation Resistance: ≥ 100,000 MΩ @ 20 °C. 
Temperature Coefficient: -200 × 10-6 / °C. 
Temperature Range: -55 °C to +85 °C. 
Test Voltage: 1.5 × Vr for 5 sec. 
Rated Voltage: 400Vdc/250Vac 
Dielectric Thickness: 5 μm 
Metal Layers Thickness: 0.04 μm 
Metal Layers Conductivity: 1 - 2 Ω / cm2 
 
General Information 
Type: Metallized Film Capacitor. 
Dielectric: Polypropylene Film. 
Electrodes: Aluminum Metallized, Vacuum Deposited. 
Construction: Round Tubular "Square Aspect Ratio" Type, Axial Leads. 
Winding: Bifilar Extended Metallized Film. 
Contact: Non-Inductive, Zinc Thermally Sprayed Extended Film. 
Coating: Black Plastic Tape Wrapped, Grey Epoxy Resin Sealed. 
Leads: Tinned Plated Oxygen Free Pure Copper. 
 
Features 
Special Tubular "Square Aspect Ratio" Type Construction. 
High Conductivity Metallization. 
Soldered Lead Termination. 
High Current Capacity. 
High Frequency and Temperature Stability. 
Excellent Long Term Electrical and Mechanical Reliability. 
No Short Term and / or Long Term Signal Aberration. 
Unrivaled Handling of Fast High Current Pulse. 
 
Electrical Performance 
Very Low Dielectric Absorption Factor. 
Very Low Equivalent Series Resistance. 
Very Low Inductance. 
Very High Resonant Frequency. 
Ultra Linear Impedance Characteristics. 
Very Low Dissipation Factor. 
Very High Insulation Resistance.