WITH CALIBRATION FILE - REQUIRES PHANTOM POWER & LEAD
The Dayton Audio EMM-6 is a precision electret condenser microphone designed for measurement and critical recording applications. The extremely flat frequency response and true omni-directional polar pattern make it perfect for use with room acoustic analyzers and audio measurement systems. The EMM-6 microphone is individually hand calibrated using a laboratory standard Brüel & Kjær microphone in conjunction with a DAAS computer measuring system. Each microphone includes stand mount, foam windscreen, transport case, and its own unique printed and downloadable calibration response graph and .txt data file (see below).
A unique serialized calibration .txt file is available for the EMM-6. Once you receive your microphone, visit daytonaudio.com where you will be prompted to enter the
The Dayton Audio EMM-6 is a precision electret condenser microphone designed for measurement and critical recording applications. The extremely flat frequency response and true omni-directional polar pattern make it perfect for use with room acoustic analyzers and audio measurement systems. The EMM-6 microphone is individually hand calibrated using a laboratory standard Brüel & Kjær microphone in conjunction with a DAAS computer measuring system. Each microphone includes stand mount, foam windscreen, transport case, and its own unique printed and downloadable calibration response graph and .txt data file (see below).
A unique serialized calibration .txt file is available for the EMM-6. Once you receive your microphone, visit daytonaudio.com where you will be prompted to enter the serial number found on the base of your EMM-6. After entering the serial number, your unique calibration .txt file will be available for you to download.
- Perfect for use with room acoustic analyzers and audio measurement systems with analogue XLR input
- Low noise FET input reduces low-frequency distortion
- 18Hz - 20KHz, 200Ω, 1% THD at 1KHz 127dB
- Gold-plated XLR connector balanced output
- High-quality components and rugged construction 190mm long
- Calibrated using a laboratory standard Bruel & Kjær microphone
- Includes its own unique calibration response graph to serial number
- Each individual electronic calibration file is available for download
- Includes stand mount, foam windscreen, and protective case
- Requires phantom power from +15V to +48V
Capsule type: 6 mm electret condenser
Polar pattern: omni-directional
Frequency response: 18 Hz - 20 kHz
Impedance: 200 ohms between pins 2 and 3
Sensitivity at 1 kHz into 1K ohm: 10mV/Pa (-40 dBV, re. 0 dB = 1V/Pa)
Max SPL for 1% THD @ 1 kHz: 127 dB
S/N ratio: 70 dB A-weighted
Connector: gold plated XLR
Phantom power: +15V to +48V, 4 mA
Weight: 144 grams.
Read / Show More
Read / Less More