SOLD IN SINGLES - ANCHOR & BOLT SOLD SEPARATE
The TOGGLER Snaptoggle® anchor is a heavy-duty hollow wall anchor for use in walls, ceilings, or floors of materials such as gypsum board, drywall with a steel stud, concrete block, tile over drywall, etc. The anchor is pre-assembled and ready for immediate use. The ratcheting strap / locking cap assembly positions the one-piece zinc-plated steel anchoring channel flush against the rear of the wall. The cap slides down the straps to lock flush against the front of the wall. The straps on the outside of the wall are then easily and quickly snapped off by hand flush with the surface of the wall. Holding is dependent only on a metal bolt to metal channel connection. Sold in singles.
SNAPTOGGLE® anchors get their name from their speed and ease of use as they work in a SNAP!
Unlike ot
The TOGGLER Snaptoggle® anchor is a heavy-duty hollow wall anchor for use in walls, ceilings, or floors of materials such as gypsum board, drywall with a steel stud, concrete block, tile over drywall, etc. The anchor is pre-assembled and ready for immediate use. The ratcheting strap / locking cap assembly positions the one-piece zinc-plated steel anchoring channel flush against the rear of the wall. The cap slides down the straps to lock flush against the front of the wall. The straps on the outside of the wall are then easily and quickly snapped off by hand flush with the surface of the wall. Holding is dependent only on a metal bolt to metal channel connection. Sold in singles.
SNAPTOGGLE® anchors get their name from their speed and ease of use as they work in a SNAP!
Unlike other anchors, this system does not require the bolt or the bracket for initial installation.
Simply drill a 1/2" 12mm hole and insert the metal head, then zip tight and its held in place.
New longer and stronger plastic straps that work in base materials 10mm to 90mm thick.
Excess straps made to snap-off flush with the wall every time, assuring precise alignment.
You are now ready to attach the fixture with 3/16" bolts to length required (sold separate).
Exceeds most building requirements supporting inexcess of 100Kg per bolt (depends on wall).
Made from premium grade materials in the USA for reliable long-life corrosion resistant service .
Strong enough for grab-bars, shelving, mirrors, drapes, curtains, fans, and flat-screen TVs.
- Pre-assembled and ready for immediate use
- Pre-installs without requiring fixture or bolt
- Far superior to wing toggles, holds twice the load
- Trivalent B633-85 III/Sc zinc plating RoHS compliant
- Automatically adjusts to thickness of wall or ceiling
- Plastic straps suit Wall thickness; 10mm to 90mm
- Holding weight: Drywall 12mm 100Kg, 16mm 160Kg
- Pre-drill hole = 1/2" 12mm (smaller than springwing)
- Minimum clearance behind wall is ~50mm
- Requires 3/16"-24 imperial bolt sold separate
Read / Show More
Read / Less More