2x 35W FLAT AMPLIFIER WITH IR CONTROL - McLELLAND

2x 35W FLAT AMPLIFIER WITH IR CONTROL - McLELLAND

HIDE-AWAY COMPACT WITH ANALOGUE & DIGITAL INPUTS

AMP-235 is a low-profile 2 channel Class-D 35Wrms amplifier that is ideal for an invisible entertainment system installation. The build-in IR learning function allows the volume to be controlled by an existing TV’s remote control (external IR receiver included). Ample power for most speakers and potentially a sub (Single RCA line output). Accepts analogue stereo RCA or digital Toslink or Coax inputs, input is automatically selected by the unit. Includes power supply, an IR remote control and external IR receiver eye on a 1.2M lead.

Audio Inputs: Stereo RCA, coaxial or optical (up to 24bit/96kHz PCM)
Outputs: 35Wrms per Channel, 1kHz into 4-8 Ohms
2 Channels 90dB SNR (1KHz) 20Hz to 20kHz +3dB
Speaker out: removable screw-down connec

Audio Inputs: Stereo RCA, coaxial or optical (up to 24bit/96kHz PCM)
Outputs: 35Wrms per Channel, 1kHz into 4-8 Ohms
2 Channels 90dB SNR (1KHz) 20Hz to 20kHz +3dB
Speaker out: removable screw-down connector for 14AWG wire
Subwoofer out: (RCA) with integrated 120Hz low pass filter
IR Sensor Included: 3.5mm stereo jack on a lead
External 90W power supply included
Compact dimensions: 154 x 203 x 30 mm

Q: What is the remote control for?

A: The remote control is default to control the volume of the amplifier AMP235. AMP235 can also learn three IR commands (Vol+, Vol-, and Mute) from your TV or Foxtel remote control. After it learns, you can use your TV/Foxtel remote control to controlthe volume of the amplifier. However, the supplied AMP235 remote control will not work anymore.

Q: What are the steps to learn IR commands from the TV (Vol+, Vol-, and Mute), refer to the video.

A: The Vol+, Vol- and Mute commands must be learned in sequence, 1st Vol+, then Vol-, then Mute.
1. On AMP235, press and hold the IR Learning Button for 2 seconds until the IR Confirm LED blinks slowly.
2.Place your TV remote control about 3-4 inches (7-10cm) away from the IR Learning window of AMP235, aiming the remote directly at theIR Learning window.
3.Press and hold the TV remote’s Vol + key until the IR Confirm LED blinks for 1 second.
4.Press and hold the TV remote’s Vol – key until the IR Confirm LED blinks for 1 second.
5.Press and hold the TV remote’s Mute– key until the IR Confirm LED blinks for 1 second.
6.Confirm proper operation of all three volume commands. If any of the three commands must be re-learned, all three commands must be re-learned in order.

Q: I plug in the powersupply, but the power LED light is not ON.

A: The power LED may have been disabled, you can enable it by pressing and hold the AMP235 IRLearning Button for approximately 10 seconds while powering Confirm LED will blink once when togging from "Disabled" to Enabled" and twice when toggling from "Enabled" to "Disabled". Once the IR Confirm LED has blinked, you can release the IR Learning Button.

Read / Show More