CAT5 EXTENDER REDBACK - PA4928 RECEIVER

AUSTRALIAN MADE

This single output microphone/line hub is designed to accept audio from a preamp wallplate (PA4931) or box (PA4932). Accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to this hub. Wallplate microphone input is via a balanced XLR whilst the line input is via 2 x RCA sockets or 3.5mm audio jack for portable devices with a lower level line output.
The PA4928 hub has a dedicated balanced or unbalanced output, with volume control. Output has DIP switch selectable balanced mic/line, or unbalanced line level output which can be fed directly into amplifiers. Powered by 24V DC from the supplied plugpack.

The Redback CAT5 Exte

This single output microphone/line hub is designed to accept audio from a preamp wallplate (PA4931) or box (PA4932). Accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to this hub. Wallplate microphone input is via a balanced XLR whilst the line input is via 2 x RCA sockets or 3.5mm audio jack for portable devices with a lower level line output.
The PA4928 hub has a dedicated balanced or unbalanced output, with volume control. Output has DIP switch selectable balanced mic/line, or unbalanced line level output which can be fed directly into amplifiers. Powered by 24V DC from the supplied plugpack.

The Redback CAT5 Extender series is designed to send and receive audio over CAT5 cable up to a maximum distance of 300 metres. An installation requires one receiver PA4928 and your choice of sender being a PA4932 unit or wall plate style options PA4931 (Horizontal) or PA4931V (Vertical), all sold separate. The input to output is either a balanced microphone XLR, or line level stereo audio via RCA or 3.5mm. The receiver includes a mains power pack and phantom powers the senders via the CAT5 cable. These units are of premium quality and performance and made in Australia by Redback.

• Connects to PA4931/ PA4931V Microphone/Line Pre-Amplifer Zone Wallplate or PA4932 Zone Preamp Box.
• Easy Cat5e/6 UTP data cabling connection.
• Up to 300m cable runs out to wallplate/box.
• Balanced Euro terminal block connections.
• Balanced mic or line level operation.
• 24V DC operation.
• Australian designed & assembled.

Found in Category : AV Extenders