HDMI EXTENDER KIT OVER CAT5 - PRO2

TRANSMITTER & SENDER KIT WITH EDID SUPPORT

EDID: When the sink can’t display the signal, try to connect HDMI transmitter to the display device, plug the power supply into Transmitter, press the “EDID copy button” and the light flashes, the EDID data has been from the display device successfully. To reset: press ”EDID copy button” for 3 seconds, The EDID will be reset to the default setting.

Each set includes one transmitter and one receiver
Easy installation, no need for any configuration or cable tuning
1080p 24bit HDMI up to 50M using a single CAT5e/6 cable
Automatic feedback, equalisation and amplification
EDID reading and saving from display
2x DC 5V 1A power supply (included)
Requires HDMI and CAT5e/6 cables
Bandwidth can be up to 6.75 G

Each set includes one transmitter and one receiver
Easy installation, no need for any configuration or cable tuning
1080p 24bit HDMI up to 50M using a single CAT5e/6 cable
Automatic feedback, equalisation and amplification
EDID reading and saving from display
2x DC 5V 1A power supply (included)
Requires HDMI and CAT5e/6 cables
Bandwidth can be up to 6.75 Gbps
Deep Colour up to 24-bit & 3D compatible

Operating Temperature Range −5 to +35°C
Operating Humidity Range 5 to 90%RH (No Condensation)
Input Video Signal 0.5-1.0 Volts p-p
Input DDC Signal 5 volts p-p(TTL)
Support Video Format DTV/HDTV 480i/576i/480P/576P/720P/1080i/1080P 3D video
Video Output HDMI, HDCP
Support Audio Format DTS-HD Master Audio, Dolby true-HD, etc.
Transmission Distance 1080P 8-bit 50m (Maximum) over single CAT5E/6 24AWG Solid-core
Power consumption 5 Watts (Maximum)
Dimension (L×W×H) 83x48x25mm
Net Weight 250g (Pair)

Read / Show More