5" ULTRA-THIN VERTICAL RIBBON TWEETER MATCHED-PAIR
This is a vertical, double height version of the traditional JP3.0 unit Super-Thin 0.009mm aluminium strip in a double height optioned package. Super-strong Neodymium offers extra efficiency and linear field density. Extremely thin diaphragm for maximising signal fidelity and extra response Low distortion factor, good power-handling capabilities, flat impedance. High linear impedance and amplitude response over a very broad range. Attractive silver rough-finish aluminium face plate with rubber grommet. Quality polycarbonate package with low stray flux for close to TV use. Recommended minimum crossover frequency is 2KHz 3rd Order (-18dB) Higher crossover frequency will give higher system total power handling Ribbon mass 25mg, 960mm² 8x120x0.009mm Super strong 0.6 Tesla Neodymium magnet Impe
This is a vertical, double height version of the traditional JP3.0 unit Super-Thin 0.009mm aluminium strip in a double height optioned package. Super-strong Neodymium offers extra efficiency and linear field density. Extremely thin diaphragm for maximising signal fidelity and extra response Low distortion factor, good power-handling capabilities, flat impedance. High linear impedance and amplitude response over a very broad range. Attractive silver rough-finish aluminium face plate with rubber grommet. Quality polycarbonate package with low stray flux for close to TV use. Recommended minimum crossover frequency is 2KHz 3rd Order (-18dB) Higher crossover frequency will give higher system total power handling Ribbon mass 25mg, 960mm² 8x120x0.009mm Super strong 0.6 Tesla Neodymium magnet Impedance 7 Ohm, DC 0.02 ohm [Beware!]
Sensitivity 98dB
1.4KHz to 40KHz and above
Resonance frequency 440Hz
Power 17W Normal, 40W
Max Fascia 150x70mm
Ultra-thin aluminium
5” (120mm) Ribbon Pair:
SOLD IN MATCHED PAIRS
- Super strong Neodymium magnet for high efficiency
- Build-in impedance conversion transformer
- Effective from 1,400Hz upwards due to the large diaphragm area and low self-resonance.
- Extremely thin diaphragm (0.009mm Aluminium foil) guarantees a high degree of signal fidelity and broad frequency response.
- Low distortion factor, good power-handling capabilities, high linear impedance and amplitude frequency response and the broad frequency response range.
- Flat impedance from 1,000 to 40,000Hz
Ribbon material Aluminium
Ribbon mass 25mg
Ribbon dimension 8mmx120mmx0.009mm
Ribbon area 960 square millimeters
Gap flux 0.6 Tesla
Gap height 3mm
Impedance 7 Ohm
DCR 0.02 ohm
Sensitivity 98dB/M/W
Frequency response 1,700~40,000Hz
Resonance frequency 440Hz
Power handling 17W Normal, 40W Max
Recommended crossover frequency 2,000Hz 3rd –Order
Read / Show More
Read / Less More