160W TUBE HYBRID AMPLIFIER BT - ACCENTO DYNAMICA

160W TUBE HYBRID AMPLIFIER BT - ACCENTO DYNAMICA

DSP CONTROLLED DAC - PC, BT, USB, & NOW WITH PHONO

HYBRID offers impressive sound quality by combining multiple vacuum tubes with a classic solid-state Class-AB power amplifier, packaged in an attractive brushed aluminium enclosure. The ADHA160BT is a modern classic from analogue and 24bit 196KHz digital inputs to the high performance of a powerful 80Wrms per channel transistor linear amplifier with low distortion.

The Accento-Dynamica hybrid amplifier is a German designed HiFi unit that uses both tubes and solid-state. The tube circuits are exclusively used in the pre-amp section to give your audio that classic tube sound that generally softens todays digital sources giving a warmer, more emotional audio experience while listening in the soft glow of the tubes. The output stage is classic Class-AB for improved speaker driving perfomance and low distortion sound reproduction. Transistors are used in the output stage because they can generate more power with less heat and reliability issues. Large, dual toroidal transformers in the power supply are used for greater performance with ample power to drive any modern speaker system. The ADHA160BT gives you the best of both worlds in sound and technology while appearing very impressive in the brushed aluminium enclosure that looks truly like classic audio with analogue VU power meters and old-school LED display. Bass and treble controls are included plus a remote control for volume, source select and control of the media player. The unit has two RCA inputs CD or other analogue source, RCA phono-preamp input for direct-connection to your tuntable, plus Digital inputs with Coaxial or Optical Toslink. Built-in USB audio player (supports MP3, WAV, APE, FLAC with Play/Pause/FF/REW). The USB can also be connected to a PC for streaming audio playback. BT 5.3 wireless audio streaming from a phone or tablet, etc. There is also Pre-Amp output (post tubes and volume) to Main Amp Input with RCA Connections. The unit comes with 4mm / bare-wire speaker connectors for 4 to 8 ohm speakers, plus there is an RCA line-level output for an external active subwoofer if desired. With impressive sound quality, high power, digital audio connections, all in an attractive enclosure, the ADHA160BT is a modern classic.

Tube Preamplifier and tube regulator
Class-AB power amp with 8x Transistors
Stereo high power 2x 80Wrms (4Ω)
20Hz to 20KHz, SNR >90dB
DSP DAC 44.1-192KHz 24 bit
USB Input (PC) standard PnP drivers
USB stick MP3, WMA, FLAC player
Coax and Toslink Optical Inputs
Wireless BT V5.3 up to 250m
1x Phono preamplifier RIAA input
1x AUX inputs suit for CD, TV, etc.
Bass and Treble controls
Tube-pre out to Main amp input
2.1 with single RCA subwoofer out
Temperature controlled fan
Remote control Volume & Source
Old school LED display
Dual analogue VU meters
Two heavy-duty toroidal transformers
Brushed aluminium enclosure
330(d)x315(w)x165(h)mm 7.3Kg

Specifications from Factory:
Wireless BT 5.3
Remote control: Yes IR
Input Voltage: 240VAC IEC Lead
Input:Coaxial / Optical / Phono / AUX2 / PC-USB / Wireless BT / HiFi in / Sub out
Power Output: 80WRMSx2(4ohm)
Total Harmonic Distortion: 2%
Minimum Speaker Impedance: 4 ohm
Frequency Response:20HZ-20KHZ
Channel Separation: 83db
Dynamic Range:85db
Signal-to-Noise Ratio:90db
AUX Input Impedance:47K
Input Sensitivity:550mV
Phono input 3mV RIAA equalised
PC-USB sample rate:8-384KHZ,24bit
Digital audio DAC sample rate:44.1KHZ-192KHZ,24bit
Preamplifier tube: 6U1x2,6A2x2,6H2x2,WY-3Px1
Transistors:ToshibaA1943x4,ToshibaC5200x4
Dimension:L330xW315xH165mm, including tube and feet
Net Weight: 7.3Kg

USB PC Streaming: Tested OK with Win10, no drivers required. Did not work with Android or iOS. Read / Show More