DAYTON AUDIO 2 WAY SPEAKER CROSSOVER

2-WAY 12dB 4Ω/8Ω 300Wrms

The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low-pass sections.

Universal design 12dB/Octave Linkwitz-Riley crossover points. 4.8mm terminals. 300Wrms 8Ω input with jumper leads to change the woofer output to 4Ω or 8Ω.

• 18 gauge inductors are used to keep DC resistance to a minimum
• Unique design feature of the low-pass section allows for use of 8 or 4 ohm woofers (or dual 8 ohm)
• All components are glued or fastened down to eliminate buzzing and vibrations
• High quality blue PC board uses a back plate for added rigidity

The Dayton Audio line of 2-way crossovers were designed using a second order (12 dB/octave) Linkwitz-Riley alignment. Dayton Audio metallized polyester film capacitors are used in both the high and low-pass sections.

Universal design 12dB/Octave Linkwitz-Riley crossover points. 4.8mm terminals. 300Wrms 8Ω input with jumper leads to change the woofer output to 4Ω or 8Ω.

• 18 gauge inductors are used to keep DC resistance to a minimum
• Unique design feature of the low-pass section allows for use of 8 or 4 ohm woofers (or dual 8 ohm)
• All components are glued or fastened down to eliminate buzzing and vibrations
• High quality blue PC board uses a back plate for added rigidity

Found in Category : DAYTON AUDIO