12.8V 3.8AH LiFePO4 - DRYPOWER

RECHARGEABLE LITHIUM IRON PHOSPHATE BATTERY

Drypower 12LFP3.8 is a 12.8V 3.8Ah Lithium Iron Phosphate (LiFePO4) rechargeable battery with 4.75mm spade terminals. Compact and light weight compares to SLA batteries with the same capacity. Fast charging. The battery has a 4S1P configuration.

Long Service Life, >2000 cycles @100% DoD (25°C) to 80% of original capacity - longer service life than SLA to reduce maintenance costs.
Higher total system capacity and superior utilisation (full 100% DoD) to reduce overall system size and footprint. More Power p/kg.
Enclosed in IP65 ingress rated case with closed loop terminals - suitable for harsh environments
Stable Chemistry & Built-in Circuit Protection
Lightweight, Approx. 1/2 the weight (or less) of equivalent in SLA means l

Long Service Life, >2000 cycles @100% DoD (25°C) to 80% of original capacity - longer service life than SLA to reduce maintenance costs.
Higher total system capacity and superior utilisation (full 100% DoD) to reduce overall system size and footprint. More Power p/kg.
Enclosed in IP65 ingress rated case with closed loop terminals - suitable for harsh environments
Stable Chemistry & Built-in Circuit Protection
Lightweight, Approx. 1/2 the weight (or less) of equivalent in SLA means lower logistics costs and minimal OH&S concerns.
Faster charge/discharge rates (C/2 LiFePO4 vs C/20 SLA) for higher power usage and less downtime when charging.
Wide Operating Temperature Tolerance from -20°C up to +60°C.
Fully Recyclable Battery, with no lead or calcium that can leak into the enviroment.

Do NOT short circuit, crush or disassemble.
Do NOT heat or incinerate.
Do NOT immerse in any liquid.
Do NOT allow the battery to become overdischarged. If possible, isolate the battery when not in use.
Do NOT leave the battery in a discharged state. Always recharge after use with a Drypower approved LiFePO4 charger.
Store at 50% capacity. Recharge every 3 months. The storage area should be clean, cool, dry and ventilated.
Maximum 4 units in series. No parallel connection allowed.

BUILT-IN PROTECTION
All Drypower Rechargeable Lithium batteries adhere to strict safety guidelines by incorporating Battery Management Systems (BMS) that include protection components such as: Integrated Circuit MOSFET, FuseThermistor, Protection Circuit Module (PCM).
The BMS in each Drypower battery helps to: Maintain safety for users. Prevent damage to equipment and property. Eliminate concerns about use of the wrong type of charger. Minimise the risk of over discharge causing damage. Provide short circuit and overcharge protection.

Read / Show More