3DBI / 6DBI 477MHZ BLACK ELEVATED FEED UHF ANTENNA KIT

$154.99

- +

BUY NOW

Order Code: CBB36F1L

Availability: In Stock

The Aerpro CBB36F1L 3dBi / 6dBi 477MHz Black Elevated Feed UHF Antenna Kit is compatible with all brands of 477MHz UHF CB Radios in Australia and New Zealand. The kit includes two antenna masts which are interchangeable, giving you the best of both worlds when it comes to UHF communication. The 3dBi mast option provides a total antenna length of 445mm, which is best suited for short range communication in highly built up areas including cities, dense woodlands and mountain regions, as it produces a wider UHF signal which is less likely to be impacted by these obstructions compared to higher gain antennas. While the 6dBi mast option provides a total antenna length of 945mm, which is best suited for medium range communication in various environments such as suburban landscapes, towns and low density woodlands, as the elliptical radiation pattern is more rounded compared to a high gain antenna and radiates further compared to a low gain antenna. The whips mount to a black elevated feed base which is fitted with a medium duty black coated stainless steel spring. It’s perfect for installing on all vehicles, including those that are prone to vibration such as trucks, agricultural machinery and off-road 4WDs. The antenna is ground independent which means it can be mounted virtually anywhere on the vehicle while maintaining a stable radiation pattern. The elevated feed design helps raise the radiation pattern above the vehicle roof and other obstructions to ensure high performance when mounted on a vehicle roof gutter, guard or bullbar. It is fitted with 4.9 metre RG58 coaxial cable which is pre-terminated with an FME connector making it easy to install through the firewall grommet in vehicles. An FME to UHF PL259 screw on adaptor is also included as well as a mounting spanner for hassle-free installation. Built sturdy for the Australian outback, the CBB36F1L is the perfect all-rounder antenna kit whether you need to communicate at a building site, on the open road or throughout the Australian outback.

Suitable for use with all 477 MHz UHF CB Radios in Australia and New Zealand
Includes 3dBi and 6dBi masts in the kit which are easily interchangeable
3dBi Gain, has a broad radiation pattern suitable for short range communication
6dBi Gain, has an elliptical radiation pattern suitable for medium range communication
Great all-rounder antenna kit suitable for use in city and country areas
Recommended for use on all vehicles, including those that are prone to vibration such as trucks, agricultural machinery and off-road 4WDs
445mm (3dBi) / 945mm (6dBi) total length including spring base
150mm 3dBi flexible whip & 650mm 6dBi solid fibreglass black whip masts both with threaded base
Black elevated feed base which is fitted with a medium duty stainless steel spring
Black coated stainless steel spring reduces vibrations caused by the vehicle and driving conditions
Elevated feed and ground independent design means it can be mounted virtually anywhere on the vehicle
4.9 metre RG58 coaxial cable, insulated to reduce signal interference
FME Female connector, fitted to cable for ease of installing through the firewall grommet in vehicle
FME Male to PL259 Male adaptor included, for solder free installation
Installation spanner included, no additional tools required

Frequency: 477MHz
Gain: 3dBi / 6dBi
Main Colour: Black
Ground Independent: Yes
Elevated Feed: Yes
Total Length:
- 3dBi Whip: 445mm
- 6dBi Whip: 945mm
Mast Length:
- 3dBi Whip: 150mm
- 6dBi Whip: 650mm
Mast Width:
- 3dBi Whip: 4mm
- 6dBi Whip: 6.5mm
Mast Type:
- 3dBi Whip: Soft Fibreglass Whip
- 6dBi Whip: Solid Fiberglass Whip
Spring Type: Medium Duty Stainless Steel
Antenna Mounting Thread Size: 16mm
Mast Mounting Thread Size: 5/16"
Cable Type: RG58 Terminated with Female FME
Cable Length: 4.9 Metre (approx)
Included Accessories:
- FME to PL259 Adaptor
- Mounting Nut
- Installation Spanner

Read / Show More

Related Products for 3DBI / 6DBI 477MHZ BLACK ELEVATED FEED UHF ANTENNA KIT

Related Products : View Product Group Page

Found in Category : AERPRO

Product Specs for 3DBI / 6DBI 477MHZ BLACK ELEVATED FEED UHF ANTENNA KIT

Description	3DBI / 6DBI 477MHZ BLACK ELEVATED FEED UHF ANTENNA KIT
Wagner eBook	06-11
Length	150/650mm
Gain	3/6dB
Type	477MHz
Barcode	9317114923387
Manufacturer	AERPRO
Colour	Black
OEM	CBB36F1L
Plug	FME + PL259 adaptor
Packaging	Side Blister
Base	Spring Elevated

No downloads currently available for 3DBI / 6DBI 477MHZ BLACK ELEVATED FEED UHF ANTENNA KIT

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.

Full Name* Enter Full Name

Email* Enter Email Address Enter Valid Email

Phone* Enter Phone Number

Code*

Download Required / Comments** Download Required / Comments.

Chars Remaining

Product Code*

Full Name* Enter Full Name

QTY Required* Enter QTY

Email* Enter Email Address Enter Valid Email

Delivery Time* Enter Delivery Time

Phone* Enter Phone Number

Target Price

Code*

Notes / Addtional Info.* Enter The Notes / Addtional Info.

Chars Remaining

$9.90 Australia Wide Flat Rate Shipping*

No matter where you are located in Australia we offer flat rate shipping. Some conditions apply,
please see our Terms and Conditions page.

Store Pick Up from Sydney Showroom

Goods can be picked from our premises from 8.30AM to 5.00PM Monday to Friday and from 9AM till 4PM on Saturday.
In order to avoid delays it is recommended that you place your order 2 hours prior to pick up. please see our
Terms and Conditions page for more details.