CAT5 EXTENDER REDBACK - PA4928 RECEIVER

AUSTRALIAN MADE

This Balanced Microphone/Line Pre Amplifier accepts either a microphone or line input for conversion to a balanced high level signal. Mic input is via a balanced XLR whilst the line input is via 2 x RCA sockets or 3.5mm jack. The 3V output signal is carried via Cat5e cable (suitable for distribution up to 300m without interference) to the PA4928 Line Output box which provides a balanced high or low level output and an unbalanced Aux output signal to be fed into an amplifier. Power is supplied via the included 24V Plugpack which is connected to the PA4928 Line Output box. Power is provided through the Cat5e cable connection. The PA4928 has a 24V DC switched output (limited to 120mA current draw) which activates when the VOX output of the Balanced Microphone/Line Pre Amplifier is active.

This single output microphone/line hub is designed to accept audio from a preamp wallplate (PA4931) or box (PA4932). Accepts either a microphone or line input and converts the signal to a balanced high level output. The 3V output signal is carried via Cat5e cable, (suitable for distribution up to 300m without interference) back to this hub. Wallplate microphone input is via a balanced XLR whilst the line input is via 2 x RCA sockets or 3.5mm audio jack for portable devices with a lower level line output.
The PA4928 hub has a dedicated balanced or unbalanced output, with volume control. Output has DIP switch selectable balanced mic/line, or unbalanced line level output which can be fed directly into amplifiers. Powered by 24V DC from the supplied plugpack.

The Redback CAT5 Exte