DIGITAL ADDRESSABLE LED - FULL COLOUR RGB STRIPS - WS2811 IC BUILT-IN

EACH INDIVIDUAL LED CAN BE SET TO DIFFERENT COLOUR

Digital Addressable LED is a new and easy way to add complex lighting effects to any project. The difference between "analogue" and "digital" is the analogue-type strips have all the LEDs connected in parallel and it acts like one huge tri-colour LED and you can set the entire strip to any colour you want, but you can't control the individual LED's colours. For the "Digital" type, there are control chips (WS2811) embedded along the strip to interpret the digitally coded data to change the colour of individual LEDs. 
 
LED strips come in 5M reels. There are 300 individually addressable 5050 Type LEDs in total so the strips feature a lot more LEDs closer together than some of the other models on the market. There is one WS2811 IC to control every group of three LEDs. At one end of the LED strip, there is a 3 pin JST SM plug and a 2 wire cable. At the another end, there is a JST SM receptacle and a 2 wire cable. The JST connector makes it easier to wire up without soldering. The 2 wire cable is used to inject power when you are joining LED strips to

Read / Show More

Found in Category : Lighting

Image Order Code POWER VOLTAGE COLOUR IP IP RATING LENGTH More Info Cost inc GST Cart
DIGLED-1101 14.4W/M 12V DC Full colour RGB IP20 IP20 5 Metres Details $ 56.50
DIGLED-1111 14.4W/M 12V DC Full colour RGB IP65 IP65 5 Metres Details $ 69.95
DIGLED-1121 14.4W/M 12V DC Full colour RGB IP68 IP68 5 Metres Details $ 89.00
Related Products
RF CONTROLLER FOR DIGITAL ADDRESSABLE LED STRIPS

RF CONTROLLER FOR DIGITAL ADDRESSABLE LED STRIPS

This RF controller module is designed to use for digital addressable strip lights with WS2811 IC chips. It features a RF remote and a controller for controlling the LED strip. Each controller can control up to 2048 pixels (LEDs). It has 300 pre-programmed effects to choose from. And brightness is adjustable. Suitable for 12V LED strips.

Image Order Code More Info Cost inc GST Cart
SP103E Details $ 17.85
12V POWER SUPPLY FOR DIGITAL ADDRESSABLE LED STRIPS

12V POWER SUPPLY FOR DIGITAL ADDRESSABLE LED STRIPS

This power supply comes with a 2.1mm DC plug. It can also be used for power injection when cascading LED strips by cutting off the DC plug and terminating the wires directly onto 2x extra power injection wires on the cascading strips.

Image Order Code CURRENT More Info Cost inc GST Cart
SMP12V-3A-21P 3000mA Details $ 20.50

Contact us for Bulk Buy and Project Based Pricing for DIGITAL ADDRESSABLE LED - FULL COLOUR RGB STRIPS - WS2811 IC BUILT-IN



SP103E - Product Downloads

Description File Size
Notes RGBW-5-Wire_NotesAKA.pdf 168 KB

Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.


© 2015 Wagner Online Store. All Rights Reserved