VOLUME WALL PLATE 8 OHM - IR RECEIVER

IR EXTENDER OPTION REQUIRES RPT1041

Wall mount stereo 4/8Ω speaker-level volume control with built-in IR receiver. It connects between the speaker outputs of a power amplifier and a pair of speakers (300Wmax).
4 wire terminals for IR sender connection to RPT1041 (Not included).
The PRO1161 matches the minimum output impedance of the amplifier or receiver, in addition to adjusting the volume. Therefore it eliminates the need for a speaker selector or for impedance matching equipment.

Power handling: 300 watts max/ 100 watts RMS continuous
Input impedance: Config. to 1x, 2x, 4x, or 8x impedance matching
Quick connect terminals: Accepts up to 12-gauge wire
Attenuation: 12 steps including off
Total attenuation: 54 dB
Frequency response: 20 Hz ~ 20

Power handling: 300 watts max/ 100 watts RMS continuous
Input impedance: Config. to 1x, 2x, 4x, or 8x impedance matching
Quick connect terminals: Accepts up to 12-gauge wire
Attenuation: 12 steps including off
Total attenuation: 54 dB
Frequency response: 20 Hz ~ 20 KHz ±2 dB at rated power
Mounting: fits most single-gang junction boxes

Power handling: 300 watts max/ 100 watts RMS continuous
Input impedance: Config. to 1x, 2x, 4x, or 8x impedance matching
Quick connect terminals: Accepts up to 12-gauge wire
Attenuation: 12 steps including off
Total attenuation: 54 dB
Frequency response: 20 Hz ~ 20 KHz ±2 dB at rated power
Mounting: fits most single-gang junction boxes
Dimensions: 42 (W) x 103 (H) x 103 (D) mm
Weight: 456 g
IR Specifications:
Receiver frequency: 34 KHz to 40 KHz
Transmit frequency: 34 KHz to 40 KHz
Range on-axis: 55 ft. to 80 ft.
Range off-axis: 30 ft.
Main power: 12 V DC 31 mA max
Status power: 12 V DC 3 mA max
Wire requirements: 2 twisted pair, with or without shield

Read / Show More