WAVTECH IGNITION / REMOTE GENERATOR WITH DELAY FUNCTION (IRAD)

The IRAD provides solutions to three very specific problems faced in todays car audio installations. This easy to program device allows you to add a switched 12 volt output, a remote output with adjustable delay and a relay/solenoid control to overcome the issues created by vehicles with start/stop systems.

Automatic 12V ignition detection and +12V output generation
Generated +12V remote output (direct or linked to IGN)
Stop-start relay/solenoid control mode
Independent adjustable IGN & REM turn-on/off delays
>750mA continuous current per output
Compact aluminium chassis with detachable mounting tabs
Locking detachable terminals

OPERATING VOLTAGE: 6V-18V
IGNITIO

Automatic 12V ignition detection and +12V output generation
Generated +12V remote output (direct or linked to IGN)
Stop-start relay/solenoid control mode
Independent adjustable IGN & REM turn-on/off delays
>750mA continuous current per output
Compact aluminium chassis with detachable mounting tabs
Locking detachable terminals

OPERATING VOLTAGE: 6V-18V
IGNITION DETECT THRESHOLD: >0.5V B+ CHANGE
REMOTE IN TRIGGER: >6V
IGNITION OUT:
- VOLTAGE: >1V FROM B+
- CONTINUOUS CURRENT: 750mA
- PEAK CURRENT: <1.5A
REMOTE OUT:
- VOLTAGE: >1V FROM B+
- CONTINUOUS CURRENT: 750mA
- PEAK CURRENT: <1.5A
IGNITION REMOTE MODE:
- IGNITION OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (0 DEFAULT)
- REMOTE OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-5SEC, 1SEC STEPS (0 DEFAULT)
RELAY CONTROL MODE:
- IGNITION OUT: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (3MIN DEFAULT)
- REMOTE OUT: TURN-ON: N/A (BY ENGINE OFF DETECT) / TURN-OFF: N/A (SAME AS IGNITION OUT)
CURRENT DRAW:
- MAX: <1.6A (CONT.)
- IDLE: <2.6MA
DIMENSIONS:
- CHASSIS ONLY: 20x38x37.7mm
- INCLUDING TABS: 22x38x61mm

Read / Show More