KAB-BE - BATTERY EXTENSION BOARD
$21.50
Availability :
In Stock
Related Products
|
BATTERIES TO SUIT KAB-BE
A standard 18650 battery with inbuilt protection circuit does not fit in the KAB-BE charger. The BAT-KAB battery does not have the circuit and so is marginally smaller and fits fine. The KAB-BE has the protection circuit to maintain safe operation. Please only use BAT-KAB with the KAB-BE charger.
|
BAT-KAB - BATTERY SUIT KAB-BE ONLY
$12.95
Availability :
In Stock
|
POWER SUPPLY RECOMMENDED FOR KAB-BE
SUGGESTED POWER PACK CONNECTION:
KAB-BE power equirements were tested to find that 19V power source with a high available current rating and inbuilt over-current protection was required to charge these large capacity Li-Ion cells.*
Note: Testing here found that some power supply solutions were not compatible with the KAB-BE charging circuit and/or the circuits built inside some Li-Ion cells. In particular we found charging power demands were quite high and that lower current power supplies caused protection circuit issues.*
CONSTRUCTION:
Solder the MTB832 to the available solder terminals on the KAB-BE board
Connect the DCL2119ST to the MTB832 observing polarity as indicated on the board: Red lead to positive, black to negative.
Insert the three 18650 Li-Ion batteries (Supplied separately)
Note: Battery insertion, depending on the cell, can be a bit tight. You may need to first adjust the height of the terminals to accept the RBLI series of cells as sold by WES.
Connect the KAB-BE with the supplied header lead to the amplifier board as per the instructions supplied with KAB-230 or KAB-250.
Adjust the SMP90W power supply voltage setting to 19V as recommended.
Attach the 2.1mm DC plug option to the SMP90W and insert into DCL2119ST.
You should now have a functioning power supply set-up. Status LEDs will light.
This will both charge the batteries and also power the unit to around 40W total.
Simply disconnect the SMP90W for battery operation, reconnect for recharging.
DISCLAIMER:
Other voltages and supplies can be used at the users discretion.
Alternative setups are beyond the scope of this sheet and are at the risk of the user.
*This is to be used as general guide only in response to some testing here at WES.
This is by no means a comprehensive data set of available options for the KAB-BE as the constructor may connect various power options as they see fit, and as such, WES can not be held resposible for the users choice, circumstances or abilies.
We strongly suggest further research when constructing your project. A good source of information is the PartsExpress website as it has a users Q&A:
https://www.parts-express.com/Search.aspx?keyword=KAB-BE
|
$69.95
Bulk Buy: $64.64 for 10 or more
SMP-90W - SMP-90W POWER SUPPLY
Bulk Buy: $64.64 for 10 or more
$69.95
Availability :
In Stock
Loading Data.. Please Wait..
Loading Data.. Please Wait..
Contact us for Bulk Buy and Project Based Pricing for KAB BATTERY BOARD
Success! Thanks for your enquiry. Our Customer Sales Team will be in contact with you Shortly.
Loading Data.. Please Wait..
Loading Data.. Please Wait..
KAB-BE - Product Downloads
BAT-KAB - Product Downloads
Please contact us with your download requirements,e.g. User Manual, Data Sheet, etc and will get back to you.
Success! Thanks for your enquiry. Our Customer Sales Team will be in contact with you Shortly.
Loading Data.. Please Wait..